- Made from food safe, UV resistant Plastic
- 1/16" filtration via mesh screen
- Wind resistance via cables installed underneath.
- Works only with open top circular barrels (not included). 22" width recommended. Examples include open top drums and Roughneck™ and Brute™ cans.
- Stores flat or via hook through edge hole.
- System comes with 4 parts (RainSaucer, fasteners, filter, and cables).
Our product now comes in two sizes- 48" and 59"
Our product now comes in two sizes- 48" and 59"
Made in the U.S.A., the patent pending RainSaucer™ is a rain barrel accessory that allows you to harvest rainwater...- Cleanly: with a cleanable, food safe catchment system.
- Simply: it sets up in 10 minutes with no tools required.
- Anywhere: you can place the barrel wherever there is rain falling.
All of our products come with a 1 Year Limited Warranty against defects. For more pictures, please see our photos page. Our FAQ page is here
We currently don't make rain barrels themselves but we can still help you make your own with a DIY Kit.
See our Buy page to purchase products.
Profile for 59" (Actual Disk Diameter 60")
Profile for 59" (Actual Disk Diameter 60")
Surface Area: 18 sqf
Catch: 10.8 gal per in/rain
Wind Resist: up to 50MPH
Barrel Type: Open top
Install: 1 per barrel
Rainfall Rate: high
MSRP: $70
Other Specifications
Other Specifications
59 Inch Instructions
click to download
Products Brochure
click to download Profile for 48"
Profile for 48"
Surface Area: 11.25 sqf
Catch: 6.75 gal per in/rain
Wind Resist: up to 30MPH
Barrel Type: Any
Install: 1 or more per barrel
Rainfall Rate: low to med
MSRP: $55
Other Specifications
Other Specifications
- Made from food safe, UV resistant Plastic
- 2" NPS threaded male fitting
- 1/16" filtration via mesh screen
- Wind resistance via retention ring and cables.
- Works with any barrel (not included) that has native 2" NPS fine thread hole or one installed by bulkhead fitting (requires 3 1/8" hole to be made with hole saw).
- Stores flat or via hook through edge hole.
- System comes with 5 parts (RainSaucer, fasteners, adapter, filter, and retention ring)
- 2" NPS threaded male fitting
- 1/16" filtration via mesh screen
- Wind resistance via retention ring and cables.
- Works with any barrel (not included) that has native 2" NPS fine thread hole or one installed by bulkhead fitting (requires 3 1/8" hole to be made with hole saw).
- Stores flat or via hook through edge hole.
- System comes with 5 parts (RainSaucer, fasteners, adapter, filter, and retention ring)
Install Guide 48 Inch
click to download
Products Brochure
click to download